Many times when a homeowner has issues with clogged drains in their home, they may be able to correct the problem by using simple hand held tools or by using safe products to eat through the clog causing the problem. While many times these types of solutions can be done in a quick and efficient manner, some clogs may be more difficult for a homeowner to handle and they will need to contact a professional who handles plubming in Fargo ND for assistance with the issue.
Most homeowners will generally try using a plunger when a drain has stopped moving. Often the pressure the plunger creates is enough to cause the clog to shift enough so the water can begin to move and eventually the clog may even be pushed on through the pipes. If this does not work, a homeowner may decide to try using a small plumbing snake or auger. This device can generally be obtained at a hardware store and has a hook at the end of along cable or coiled wire. It is sent into the clog and turned so it can grab the clog and pull it from the pipe.
In addition to these types of tools, a homeowner may decide to use chemicals or home remedies designed to eat through the clog. This can include commercial products as well as home mixes like vinegar and baking soda. On some minor clogs, these types of options can be very successful. However, if the issue is not resolved or occurs again, calling a business who works on plubming in Fargo ND may be the best choice.
Some clogged drains are signs of a problem deep inside the plumbing of the home. While the homeowner may be able to get the water to move on some occasions, if this is the issue the problem will reoccur later on. A plumber will generally be able to detect these types of issues by doing a visual inspection of the interior of the pipes by using a special camera, which is designed to be fed into the pipes. With this device, the plumber will be able to locate the real problem and then decide how best to treat the problem. Since some clogs are due to tough clogs deep inside the pipes, a heavy-duty auger may be required. Sometimes it may simply be dirty pipe, which need cleaning with a hydro jet.
