Waste disposal units are a great way to deal with uneaten food scraps because it grinds them into smaller pieces that are less likely to clog the drain pipes. Unfortunately, these units can suffer damages or clogs. For instance, the disposal can snag on a piece of bone and burn out or damage the grinding teeth. Another possible issue is the things people poke into them in an attempt to start the unit working again. These items often do more damage than people realize and force the need for professional disposal plumbing services in Conyers Georgia.
Repairs to a failing garbage disposal can be a more difficult task than one might think because the appliance usually needs to be removed from the sink for easier access. This requires shutting off the power so the appliance can be disconnected and disconnecting the unit from the drain. Disposals are often connected to the dishwasher, and this connection needs to be removed as well. Before the appliance is removed, it needs to be propped on a bucket or similar support so it can be disconnected from the mounting bracket. This is necessary because this small device is actually heavier than it appears, and supporting it removes the chance of damage to any surrounding drain lines.
The most common reason to seek disposal plumbing services is the replacement of an old unit. After a while, the appliance can begin to leak, and this can damage the cabinets and walls. Plus, motors wear out, and this affects the grinding ability. Replacing the unit is very similar to the removal process required for most repairs, but the plumber may also need to remove any mounting hardware. The new unit will have its own mounting system, and it may not be compatible with the older hardware. Plus, the older hardware could have corrosion damage.
One the appliance is installed, it is time for testing. The first step the contractor will perform is a visual inspection of all pipe connections. If a dishwasher is available, it needs to be connected to the flange supplied for this purpose. Next, the plumber will test for leaks by running water through the device. Once they are assured no leaks exist, they will test the appliance by running water and turning it on.
