One of the biggest selling points of a metal roof is its low maintenance. For the most part, when you get a metal roof, you don’t really have to think about it once it’s installed. However, that does not mean you should completely forego safety precautions. There’s always something you can do to make sure your new roof stays completely clean and beautiful, while also performing at peak capacity. If you are in the market for metal roofing supplies in Ocala to do just that, here are the top tips that can be given to you in order to ensure that you know what you’re doing when performing maintenance on your metal roof.
Cleaning
Every now and then, usually only twice a year or right after a severe rainstorm, check the top of your roof thoroughly. While you do this, look for any kind of abrasions, stains, scratches, dirt, or grease that may have caked onto your roof. You’ll likely find a lot that needs to be cleaned off ASAP. To do this, use a soaked cloth, sponge, or low pressure spraying hose to wash off the roof. Detergent added to the mix also helps significantly when it comes to those particularly stubborn stains.
Avoiding Scratches
No one likes getting scratches or abrasions in their roof. While the occasional family of squirrels climbing on your roof won’t do this, as the metal used for roofing is a little sturdier than that, hanging tree branches and time, will. A tree branch scratching against your roof for enough time will leave ugly and easily noticeable gashes in the paint and even start digging into the metal. After enough time, anything can wear down, after all. To avoid this, make sure that any trees that are near your house have no branches near your roof, at least 6 feet of space must be between your roof and the branches. This will also make sure that no debris from the tree gets on the roof either.
Dealing with Damage
You should remove any chips, shavings, or particles of any kind you find on your rooftop and then deal with the residue of the damage left behind as soon as you notice. Because if you don’t, you run the risk of the metal oxidizing and turning into ugly rust stains. Luckily, touch up paints for this very purpose are all over the market. You just need to make sure that the paint you get is approved by the manufacturer of the roof itself.
