Basements are notorious for moisture. Dealing with an excessive amount of this moisture is the job of the sump pump. While the sump pump’s operation is designed to work on its own, it is a piece of machinery. This means that sump pumps need to have maintenance performed on them to keep them in good working order.
One of the maintenance items that should be done with Sump Pumps in Glenview is checking the power cord and batteries. Since your pump can’t work without power, you need to make sure that all the power sources are working properly. Make sure to check the power cords for fraying. In addition, check to make sure that the outlet is a ground circuit interrupter one as required for spaces where water contact is likely. Since this can shut off with water exposure, make sure that there is power to the pump.
Another maintenance item is to clean out the bottom grating of the sump pump. This grating helps to protect debris from entering your pump. But if it is blocked, than the sump pump won’t have adequate suction. This will hamper your sump pumps efforts at draining the water out of your system. Thus, it is important that this is periodically cleaned out to ensure that the water can flow freely through the pump.
The Sump Pumps in Glenview should also be physically checked to ensure they are working properly. This is done with a bucket of water. Once the water is added, the pump should kick on and drain the water. If it doesn’t start or if it has a hard time draining the water, than service will be needed on the pump. Do not attempt to repair the pump yourself.
These are a few maintenance items that need to be done on sump pumps. Although, it is easy to forget they are in the basement, they are still pieces of machinery that need attention from time to time. Visit Lakesideplumb.com if your sump pump needs some attention or isn’t working properly. After all, you need a working sump pump if you want to keep your basement dry.
