Did you know that you can check for leaks by monitoring your water meter? The very best way to determine if there is a leak in your pipes and plumbing system is to check your home’s water meter. When you check the meter, there are certain things to look for in order to detect a leak. While leak detection in Tucson by checking your water meter may not be an exact science, to get quality results, do the following:
1. Ensure that there is no water that is being used outside or inside of your home.
2. Find where your water meter is located and then check the indicator for leaks to determine if it is actually moving.
3. You may also take a reading, then take another a few hours later and if it has changed, you will know there is a leak.
If your Leak Detection in Tucson efforts are successful, and you have in fact determined that there is a leak present, then the next step will be to figure out if the leak is on the outside or the inside of your home.
1. Shut the home’s water off at the main shut off valve.
2. Check the leak indicator once more for any movement, or use the reading method again. If the indicator no longer moves, or there is not a change in the readings, then the leak is on the interior of your home. If it is still reading, or there is a change in the readings, then the leak is outside of your home.
3. If you cannot find the leak, then you should call a plumber.
There are a number of different causes of a leak, for both the interior and the exterior of your home. It is important to call in the pros if you do not have prior plumbing experience, since this can be difficult to determine.
For more information regarding Leak Detection it is a good idea to call your plumber. They will be able to provide you with insight regarding your leak issue and possible solutions. The key is to fix the issue before it becomes worse or before it causes additional damage.
