The use of electrical connectors makes it easy to merge two electrical wires carrying current. Contrasting with many other electrical wiring tasks, the installation of Electrical Connectors in Scranton PA is simple and can be done by just anybody. It is vital to note that there are different types of electric wire connectors and they each have different ways of installing them. The steps shown below explains how to install the twist-on wire connector which is the most common type.
First and foremost, always turn off the power source before embarking on any electrical wiring project to prevent potentially lethal electrical shocks. Selecting the right size of connector is very important because it can prevent both electrical failure and electrical fires. This because when a device or switch is turned on, electric current flows through the wires into the electric wire connector. On reaching the connector, the current comes across a mild resistance. This resistance causes the electrical wires to slightly heat up causing them to expand. On turning of the switch, the current stops, and the wires cool down and contracts back to its normal size. If the wrong size of wire connector was fixed, it may come off when the electrical wire expands or may fall off when it contracts. This leaves the conductors exposed, potentially causing all sorts of problems. Endeavor to choose the right size of wire connector.
A wire stripper should then be used to remove the coating from the ends of the wires that is being connected. The two wires to be connected should be lined up to become parallel to each other. There are electricians who prefer to twist the wires before inserting the connector. Place the wire connector’s cap portion over the conductors of the wires. Ensure that the exposed conducting material does not protrude from the end of the connector.
Once the connector has covered the whole of the uncovered wires, the connector should be twisted clockwise until it becomes tight. Test the strength and quality of the splice by trying to pull the connected wires apart.
Click Here for more information on Electrical Connectors in Scranton PA.
