Most people visit a dentist because they have a cavity or need to have a crown replaced. However, there are many procedures that a Dental Office in Kona can do that improves appearance. For example, the dentist can use a simple technique knows as whitening to remove most deep-set stains. The process begins with the dentist placing a paste or gel made of carbamide peroxide. This form of peroxide can be mixed with water, and the resulting chemical reaction converts it into hydrogen peroxide. The conversion drives the peroxide into and beneath the enamel so the stains can be rinsed away when it is removed.
One of the more common procedures performed by professionals like Carter S. Yokoyama D.D.S. is dental veneers. A veneer is used to cover a variety of issues such as impossible to remove stains, crooked teeth, and misshapen teeth. Dental veneers used to require extensive filing and shaping of the existing teeth so the device would fit, but modern procedures seldom require any filing. In fact, a veneer can be installed in as little as a day if the dentist makes it in their office. It is important to remember that the veneer is not a repair and it could come loose under extreme pressure.
Sometimes, a damaged tooth needs to be extracted, or the patient is missing one or more teeth. Gaps between the teeth can cause the remaining ones to shift position or become loose. A modern Dental Office in Kona may recommend the use of an implant to avoid these concerns. Simply speaking, an implant is an artificial root used as an anchor for something else. That is, the implant is an inert material such as titanium that gets surgically inserted into the jawbone. In the case of a single tooth, the anchor is covered with a porcelain crown.
Implants can also serve as an anchor for dental appliances such as a bridge or denture. Securing these devices with an immovable anchor makes speaking, biting and chewing much easier. A dental bridge is typically secured using two anchors. Dentures usually require four so the device sits tightly in place. Of course, each dental appliance must be created so the implanted stud will have something to hold on to. Please visit the website for more information.
