A band saw that is running at peak performance can be a joy to use, however, one that is not will cause a great deal frustration. There are only so many moving parts on a band saw and when one of these parts is out of line or needs repairing or replacing there will be considerable unwanted vibration and poor cuts. Band saw repair in Los Angeles is something that does not take a great deal of time but it is well worth the effort.
When a band saw is in need of repair vibration can occur when it is running at either low or high speed. If the vibration seems worse at low band speed there is usually a worn or deformed drive motor pully, the belt is worn or a bearing has failed. If the vibration occurs at low speed it will be a tire issue in most cases. Check to ensure there is not excessive dust on the tire, check to see if there is any evidence of the tire cracking or it may be actually lifting off the surface of the wheel. The blade can also cause vibration at low speed if it is cracked or has a bad weld.
The band saw blade can also be the cause of numerous problems. If the blade wanders off the wheel centers check to see if the tires have worn or perhaps hardened, it may be that the wheels are misaligned or the tracking mechanism is bent. In the event the tracking mechanism is distorted it will be necessary to undertake band saw repair in Los Angeles as the mechanism will need replacing.
Even with the best blades the cut may not be straight. If you are having difficulty in keeping the cut straight it could be that the blade is dull and needs to be replaced, however it could also indicate that the blade tension is improper. The blade guides can also be at fault, they may be improperly adjusted or the guide blocks might be worn and need replacing. If the cut takes the shape of a barrel investigate the blade, it may be too narrow for what it is you are doing or once again, the blade may be dull.
As the owner of a band saw you will know that periodically the machine will need band saw repair in Los Angeles. At the same time the repairs are being made, take the extra time to give your band saw a good tune up by looking at all the components that can be troublesome.
