Your garage door serves many functions in your home. It helps keep your home secure from burglars. This part of your home also acts as a household insulator and entryway. With so many functions, it’s necessary for your garage door to work at optimal levels. When yours does not work right and you don’t know the source of the problem, perform a basic inspection. This will help you locate the origin of the problem. Use the following guidelines for this task.
Before you do an evaluation of your garage door system, learn about its basic components. A garage door system is comprised of the garage door, an opener, and the hardware used on these two components. Most garage doors operate on spring tension. Compression and stretching of a spring allow the garage door to ascend and descend on metal tracks. The metal tracks are attached to opposite sides of the garage door opening. Mounting brackets secure the tracks to the walls. Hinges connect the garage door to the tracks through rollers.
To conduct a basic Garage Door Repair in Maple Grove, assess the condition of the metal tracks. Ensure that you thoroughly look at all visible parts. There should not be any crimps, dents, or dings. When there are, use a rubber mallet to carefully strike the defects back into place. Check the placement of the tracks. The vertical part of the tracks should be parallel to one another. The horizontal portion of the metal tracks should angle down slightly toward the back of the garage. Loosen fasteners to reposition them for proper alignment. You may have to use a drill bit to create a new hole for a screw or bolt.
After checking out your garage door system, clean it thoroughly. Use a mixture of one part water and one part dish soap. Use a sponge or cloth to remove dust build-up, hardened grease and dirt. Doing these actions can enable you to find a problem and conduct a simple Garage Door Repair in Maple Grove. For more information on garage doors and garage door services, please talk to an expert at Custom Door Sales, Inc.
