Winters in Columbus Ohio are sometimes cold, and you need your heat system working efficiently all during the winter months. In fact, the last thing most people want is heating problems during a wintry weekend or holiday, when many furnace parts suppliers are not open. Here are three things you can do which sometimes can get your heat going again.
1. Look at the Wall Thermostat
Make sure to set the thermostat to “heat.” During the early parts of winter or late fall, you may need to run the AC if you get a sudden heat wave. When this happens, you need to remember to reset your thermostat for heat.
If you have a programmable thermostat, set it to “manual.” This is a good way to make sure the problem is not in the program. Also, if you can’t see anything on the display, the batteries may need to be replaced.
2. Look at the Furnace Filter
If your furnace is separate from your cooling system, you need to change the filter at the start of the season. It’s set for many months, and it’s probably dirty. A clogged filter limits warm airflow and your heating system won’t work right. Furnace parts suppliers in Columbus Ohio have the right filters for your heat system. Make sure to measure the filter and bring the information with you, because there are many different sizes.
3. Check the Blower Motor Settings
In summer, the blower needs high speeds for cooling. However, in winter, your furnace works best with the blower at medium or low-speed settings. Changing the settings is not hard depending on the kind of system you own. Trusted furnace parts suppliers in Columbus Ohio can show you how to chance blower speeds. It’s often a simple task like moving a wire to a different terminal or plugging a connection into a different source.
